Cisco Telepresence MX200 Administrator's Guide

D14850.12 MX200 and MX300 Administrator Guide TC7.3, JULY 2015. www.cisco.com — Copyright © 2011–2015 Cisco Systems, Inc. All rights reserved.
11
Cisco TelePresence MX200 and MX300 Administrator Guide
Changing the system password
It is mandatory to set a password for a user with
ADMIN rights in order to restrict access to system
configuration. This includes the default admin user.
A warning, saying that the system password is not set, is
shown on screen until you set a password.
You can read more about passwords in the
► Setting passwords chapter.
1. Open the Change Password dialog
Hover the mouse over your the name, and
choose Change password in the drop-down list.
2. Set the new password
Enter your current and new passwords as
requested, and click Change password for the
change to take effect.
If the password currently is not set, leave
the Current password field blank.
Contents
Introduction
System settings
Setting passwords
Appendices
Web interfaceWeb interface

Cisco Telepresence MX200 Specifications

General

Resolution	1080p (Full HD)
Audio	Integrated microphone array and speakers
Network	Gigabit Ethernet
Connectivity	HDMI, USB
Video Standards	H.264
Codec	Cisco