Cisco Telepresence MX200 - Audio Volume

D14850.12 MX200 and MX300 Administrator Guide TC7.3, JULY 2015. www.cisco.com — Copyright © 2011–2015 Cisco Systems, Inc. All rights reserved.
59
Cisco TelePresence MX200 and MX300 Administrator Guide
Audio Volume
Set the speaker volume. This setting is obsoleted by the Audio DefaultVolume setting.
Requires user role: USER
Value space: <0..100>
Range: The value must be between 0 and 100. The values from 1 to 100 correspond to the
range from -34.5 dB to 15 dB (0.5 dB steps). The value 0 means that the audio is switched
off.
Example:
Audio Volume: 50
Contents
Introduction
System settings
Setting passwords
Appendices
Web interface
System settings