Cisco UCS C22 User Manual

Contents
v
Cisco UCS C22 Server Installation and Service Guide
OL-26646-01
Replacing Power Supplies 3-42
APPENDIX A Server Specifications A-1
Physical Specifications A-1
Power Specifications A-2
450W Power Supply A-2
650W Power Supply A-3
Environmental Specifications A-3
APPENDIX B Power Cord Specifications B-1
Supported Power Cords and Plugs B-1
AC Power Cord Illustrations B-3
APPENDIX C RAID Controller Considerations C-1
Supported RAID Controllers and Required Cables C-2
Mixing Drive Types in RAID Groups C-3
SuperCap Power Modules (RAID Backup Units) C-3
RAID Controller Migration C-4
Embedded RAID Controller C-5
Notes on Supported Embedded MegaRAID Levels C-6
Installing a SCU Upgrade ROM Module For Embedded RAID SAS Support C-7
Installing a Software Key Module for Embedded RAID 5 Support C-8
Enabling the Embedded RAID Controller in the BIOS C-8
Disabling the Embedded RAID Controller in the BIOS C-9
Launching the LSI Embedded RAID Configuration Utility C-9
Installing LSI MegaSR Drivers For Windows and Linux C-9
Downloading the LSI MegaSR Drivers C-10
Microsoft Windows Driver Installation C-10
Linux Driver Installation C-12
RAID Controller Cabling C-17
Cable Routing C-17
Cisco UCS C22 Server Cabling C-18
Small Form Factor 8-Drive Backplane Cabling C-18
LSI MegaRAID Card Beep Codes C-19
Restoring RAID Configuration After Replacing a RAID Controller C-20
For More Information C-20
APPENDIX D Installation for Cisco UCS Integration D-1

Cisco UCS C22 Specifications

General

Brand	Cisco
Model	UCS C22
Category	Server
Language	English