Cisco UCS S3260 Service Manual

B-1
Cisco UCS S3260 Storage Server Chassis Installation and Service Guide
APPENDIX
B
Power Cable Specifications
This appendix provides supported power cable specifications.
Supported Power Cables and Plugs
Each power supply has a separate power cable. Standard power cables or jumper power cables are
available for connection to the server. The jumper power cables, for use in racks, are available as an
optional alternative to the standard power cables.
Note Only the approved power cables or jumper power cables provided with the server are supported.
Table B-1 lists the power cables for the server power supplies.
Table B-1 Supported Power Cables for the Server
Description
Length
Feet Meters
CAB-250V-10A-BR
Power cable, 250 VAC 10 A, Brazil
8.2 2.5
CAB-250V-10A-CN
Power cable, 250 VAC 10 A, PRC
8.2 2.5
CAB-ACTW
AC power cord, 250 V, 10 A, C13 plug, Taiwan
7.5 2.3
CAB-9K10A-AU
N5000 power cable, 250 VAC 10 A, Australia
8.2 2.5
CAB-9K10A-EU
N5000 power cable, 250 VAC 10 A, Europe
8.2 2.5
CAB-9K10A-IT
N5000 power cable, 250 VAC 10 A, Italy
8.2 2.5
CAB-9K10A-SW
N5000 power cable, 250 VAC 10 A, Switzerland
8.2 2.5

Cisco UCS S3260 Specifications

General

Drive Bays	Up to 56
Maximum Storage Capacity	Up to 600 TB
Power Supply	Up to 4 hot-plug power supplies
Product Type	Storage Server Chassis
Supported Drives	SAS, SATA
Processors	Up to two Intel Xeon Scalable processors
Memory	Up to 1.5 TB DDR4 RAM
Power Supplies	Redundant 80+ Platinum power supplies
Total Drive Bays	56
Management	Cisco UCS Manager
Compatibility	Cisco UCS system
Form Factor	4U rack