Cisco Unified Access CT5760 Command Reference Guide

Command Modes
Privileged EXEC
Command History
ModificationFirst EW
Version
Release
This command was introduced.2.8Cisco IOS XE 3E
Usage Guidelines
To check that you have deleted neighbors and endpoints from the database, use the show energywise neighbors
privileged EXEC command.
If you statically add a neighbor, the clear energywise neighbors privileged EXEC command does not
affect it.
Note
EnergyWise event (show energywise eventsprivileged EXEC command) entries are cleared when you reload
or reboot the domain member.
Examples
This example shows the output that is generated when you enter the show energywise events privileged
EXEC command:
DomainMember# show energywise
Module/Interface Role Name Usage Category Lvl Imp Type
--------- ---- ---- ----- -------- --- --- ----
WS-C3560G-48PS NRGYZ-TB-09 130.0 (W) consumer 10 1 module
Table 1: show energywise Field Descriptions
DescriptionCharacter
Module or interface IDModule/Interface
Domain member roleRole
Domain member nameName
Power usage in watts (W)Usage
Domain member usage typeCategory
Domain member power levelLvl
Domain member importance valueImp
Domain member device typeType
Cisco EnergyWise Cisco IOS Command Reference for Catalyst 3850 Switches, EnergyWise Version 2.8
OL-32343-01 23
EnergyWise Commands
show energywise

Cisco Unified Access CT5760 Specifications

General

Brand	Cisco
Model	Unified Access CT5760
Category	Switch
Language	English