(Optional) Schedules the power on or power-off event.
• importance importance —The event occurs if the importance value of the
endpoint is less than or equal to the specified importance value. The range
is from 1 to 100.
• at minute hour day_of_month month day_of_week—Specifies the time
(24-hour clock) in cron format for the recurring event.
◦ minute—The range is from 0 to 59. Use * for the wildcard.
◦ hour—The range is from 0 to 23. Use * for the wildcard.
◦ day_of_month—The range is from 0 to 31. Use * for the wildcard.
◦ month—The range is from 1 (January) to 12 (December). Use * for the
wildcard.
◦ day_of_week—The range is from 0 (Sunday) to 7 (Sunday). Use * for
the wildcard.
• time-range time-range-name—Specifies the time range name for the
recurring event.
The event uses the domain member time.
recurrence importance
importance at minute
hour day_of_month
month day_of_week |
time-range
time-range-name
(Optional) Specifies the EnergyWise-specific port name.
•
You can enter alphanumeric characters and symbols, such as #, (, $, !, and
&.
•
Do not enter an asterisk (*) or a space between the characters or symbols.
name name
(Optional) Specifies the role of the port in the domain, such as a lobbyport.
•
You can enter alphanumeric characters and symbols, such as #, (, $, !, and
&.
•
Do not enter an asterisk (*) or a space between the characters or symbols.
role role
Command Default
The following are the default settings or values for the different parameters:
•
EnergyWise is disabled.
•
The domain member responds to a query to change the power level and the EnergyWise attributes.
•
The importance is 1.
•
Keywords are not defined.
•
The power level is 10.
•
The recurring event is not configured.
•
The name is the short version of the port name, for example, Gi1.0.2 for Gigabit Ethernet 1/0/2.
Cisco EnergyWise Cisco IOS Command Reference for Catalyst 3850 Switches, EnergyWise Version 2.8
OL-32343-01 11
EnergyWise Commands
energywise (interface configuration)
To Next Page
Loading...
Need help?
General