10
Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2
Configuration Examples
Step 10 Creating a WLAN—You can create a WLAN in this screen. It is disabled by default. Create an 802.1x
WLAN name. In this example, it is NGWC1-1x.
Step 11 Enabling 802.11 Radios—Radios were disabled once the country code was changed in earlier steps.
Enable the radio by checking th 802.11a/n and 802.11 b/g/n check boxes.
Step 12 Time Settings—You can choose between two modes: Manual and NTP. In the following example, choose
NTP and use 10.10.10.1 as the NTP Server IP Address.
Step 13 Save and apply the Wizard
To Next Page
Loading...
