18
Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2
Configuration Examples
Select WLAN NGWC1-1x, you can now edit its settings.
Step 21 Apply Security Settings—Under Security tab, Layer 2. Make sure WPA+WPA2 is selected as Layer 2
Security and 802.1x is selected as Auth Key Mgmt
Under WLAN > Security > AAA Server, type cisco as the Authentication and Accounting Methods
that was created earlier under AAA.
To Next Page
Loading...
