EasyManuals Logo

Cisco Unified Access CT5760 User Manual

Cisco Unified Access CT5760
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
MeaningPort LED ColorPort Mode
10/100/1000/SFP portsSPEED
Port is operating at 10 Mb/s.Off
Port is operating at 100 Mb/s.Green
Port is operating at 1000 Mb/s.Single green flash (on for
100 ms, off for 1900 ms)
Port is operating at 2500, 5000 or 10000 Mb/sBlinking twice
Network module slots
Port is not operating.
Off
Port is operating at up to 10 Gb/s.Blinking green
Port is operating in half duplex.
OffDUPLX (duplex)
Port is operating in full duplex.Green
The switch is not the active switch.
For a standalone switch, this LED is off.
Note
OffACTV (data active
switch)
The switch is the active switch.Green
Error during active switch election.Amber
Switch is a standby member of a data stack and assumes
active responsibilities if the current active switch fails.
Blinking green
No stack member corresponding to that member number.
OffSTACK (stack
member)
Stack member number.Blinking green
Member numbers of other stack member switches.Green
Catalyst 3850 Switch Hardware Installation Guide
OL-26779-0518
Product Overview
Port LEDs and Modes

Table of Contents

Other manuals for Cisco Unified Access CT5760

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Unified Access CT5760 and is the answer not in the manual?

Cisco Unified Access CT5760 Specifications

General IconGeneral
BrandCisco
ModelUnified Access CT5760
CategorySwitch
LanguageEnglish

Related product manuals