Cisco vEdge 1000 - Page 125

DescriptionvEdge5000
Router
vEdge
2000
Router
vEdge
1000
Router
Viptela Part
Number
Manufacturer & Part
Number
• SFP transceiver
• LC-type connector
• Short-reach 850-nm optics over
multimode fiber for 1-Gbps
applications
XXXCisco-Finisar
FTLF8519P2BCL-C4
• SFP transceiver
• LC-type connector
• Short-reach 850-nm optics for
multi-mode fiber for 1-Gbps
applications
XXXSFP-1GE-SXFinisar
FTLF8519P3BNL
• SFP+ transceiver
• LC-type connector
• Short-reach 850-nm optics over
multimode fiber for 10-Gbps
applications
XXSFP+-10GE-SRFinisar
FTLX8574D3BCL
• SFP+ transceiver
• LC-type transceiver
• Short-reach 850-nm optics for
multi-mode fiber for dual-rate 1
Gbps/10 Gbps applications
Note : The SFP+ ports of the 10-Gigabit
Ethernet PIM support a rate of 10 Gbps
only. 1 Gbps is not supported.
XXFinisar
FTLX8571D3BCV
• SFP+ transceiver
• LC-type connector
• Long-reach 1310-nm optics for
single-mode fiber up to 10 km for
dual-rate 1 Gbps/10 Gbps applications
Note: The SFP+ ports on the 10-Gigabit
Ethernet PIM support a rate of 10 Gbps
only. 1 Gbps is not supported.
XXFinisar
FTLX1471D3BCV
Hardware Installation Guide for vEdge Routers
119
vEdge 1000 Router
Supported Transceivers