Table 48:
QuantityComponent
1vEdge 1000 dual rack-mount tray
4Condor AC adapter housing bracket
4Sparkle AC adapter housing bracket
1Front stopper
1Left extended ear
1Right extended ear
88-32 socket head shoulder screws (A)
48-32 X 1/2" flat-head screws (B)
48-32 Kep nuts (D)
810-32 rack-mount screws
1Allen key (to use with the #8-32 shoulder screws, socket head 'A')
Figure 5: Screws and Nuts Included in the Rack-Mount Kit
Mount a vEdge 1000 Router Using a Rack-Mount Tray
In addition to the rack-mount accessory kit, you need the following tools to mount a vEdge 1000 router in a
19-inch rack using a rack-mount tray:
• Number 2 Phillips (+) screwdriver
• Tape measure
Mounting a vEdge 1000 router in a 19-inch rack is a two-step process:
Hardware Installation Guide for vEdge Routers
137
vEdge 1000 Router
Install the vEdge 1000 Router
To Next Page
Loading...
