Cisco vEdge 1000 - Page 50

usergroup basic
task system read write
task interface read write
!
usergroup netadmin
!
usergroup operator
task system read
task interface read
task policy read
task routing read
task security read
!
user admin
password
$6$3qFDal/MH1FMQrOU$bGhvUMbglG26UqXpZytrcCgUWvuV.PRJavnWjOvsUPNMWjomWCdUrwMe1sF/fI58nYYB03prGJJs59xSPKLov/
!
!
logging
disk
enable
!
!
!
omp
no shutdown
graceful-restart
advertise connected
advertise static
!
security
ipsec
authentication-type ah-sha1-hmac sha1-hmac
!
!
vpn 0
interface ge0/4
ip dhcp-client
tunnel-interface
encapsulation ipsec
no allow-service bgp
allow-service dhcp
allow-service dns
allow-service icmp
no allow-service sshd
no allow-service netconf
no allow-service ntp
no allow-service ospf
no allow-service stun
!
no shutdown
!
!
vpn 512
interface ge0/0
ip address 192.168.1.1/24
no shutdown
!
!
Default Configuration for Software Releases 15.4 and Earlier
For Releases 15.4 and earlier, the default configuration file looks like this:
Hardware Installation Guide for vEdge Routers
44
vEdge 100b Router
vEdge 100b Router Default Configuration