Cisco WAP371 - LED Display

Administration
LED Display
Cisco Small Business WAP371 Wireless Access Point Administration Guide 31
3
Password: Your Windows Live account password
Yahoo! Mail
Yahoo requires using a paid account for this type of service. Yahoo
recommends the following settings:
Data Encryption: TLSv1
SMTP Server: plus.smtp.mail.yahoo.com
SMTP Port: 465 or 587
Username: Your email address, without the domain name such as myName (without
@yahoo.com)
Password: Your Yahoo account password
The following example shows a sample format of a general log email:
From: AP-192.168.2.10@mailserver.com
Sent: Wednesday, September 09, 2009 11:16 AM
To: administrator@mailserver.com
Subject: log message from AP
TIME PriorityProcess Id Message
Sep 8 03:48:25 info login[1457] root login on ttyp0
Sep 8 03:48:26 info mini_http-ssl[1175] Max concurrent connections of 20
reached
LED Display
The WAP device has 3 LEDs: Power, Ethernet, and WLAN. Use the LED Display page to
enable or disable all the LEDs.
The LED Display is enabled by default. When LED Display is disabled, all the LEDs are
turned off. When enabled, they indicate corresponding status and activity of the WAP device.
To change the LED display:
STEP 1 Select Administration > LED Display in the navigation pane.
STEP 2 Click to enable the LEDs or clear Enable to disable the LEDs.
STEP 3 Click Save. The changes are saved to the Startup Configuration.