Contents
iv
Catalyst 2940 Hardware Installation Guide
OL-6157-01
Rear-Panel Description 2-9
Power Connector 2-9
Console Port 2-10
Security Slots 2-10
Management Options 2-11
CHAPTER
2 Installation 3-1
Preparing for Installation 3-1
Warnings 3-1
Installation Guidelines 3-3
Verifying Package Contents 3-3
Verifying Switch Operation 3-4
Installing the Switch 3-5
Installing the Switch on a Desk (Without Mounting Screws) 3-5
Installing the Switch on a Desk (With Mounting Screws) 3-5
Installing the Switch Under a Desk 3-7
Installing the Switch on a Wall 3-9
Installing the Switch (Magnet Mount) 3-12
Connecting to an SFP Module 3-12
Connecting to 10/100 Ports and the 10/100/1000 Port 3-14
Connecting to the 100BASE-FX Port 3-15
Connecting to an SFP Module 3-16
Where to Go Next 3-17
CHAPTER
3 Troubleshooting 4-1
Understanding POST Results 4-1
Diagnosing Common Problems 4-1
APPENDIX
A Technical Specifications A-1
APPENDIX
B Connectors and Cables B-1
Connector Specifications B-1
10/100 Ports B-1
10/100/1000 Ports B-3
Connecting to 10BASE-T and 100BASE-TX Devices B-3
Connecting to 1000BASE-T Devices B-3
To Next Page
Loading...
