Index
MCC-101
Cisco IOS XR Multicast Configuration Guide for the XR 12000 Series Router
OL-20371-01
shared tree, source tree, and shortest path
tree
MCC-8
PIM-SM (PIM sparse mode)
configuring
MCC-24
description MCC-7
RP MCC-7
PIM-SSM (PIM source-specific multicast mapping )
(S,G) channels
MCC-8
configuring MCC-25
datagrams, delivery MCC-8
description MCC-4, MCC-7
IGMPv3 support MCC-8
SSM mapping, restrictions MCC-27
SSM mapping, set of access lists,
configuring
MCC-27
rates per route
(example)
MCC-66
calculating MCC-34
RP (rendezvous point)
description
MCC-11
manually configuring MCC-12
RPF (Reverse Path Forwarding) MCC-13
static RP, configuring MCC-27
multicast-routing command MCC-26, MCC-37, MCC-42
multicast routing configuration mode interfaces, enabling
and disabling
MCC-23
multicast-routing ipv4 command MCC-21
multicast-routing ipv6 command MCC-21
multicast-routing submode
interface all enable command
MCC-42
mdt data command MCC-43
mdt default command MCC-43
nsf command MCC-37
vrf command MCC-43
multicast rprotocol-specific submodes, IPv6 multicast
routing (config-mcast-ipv6)
MCC-21
N
nsf lifetime command MCC-38
P
PIM
See multicast routing, PIM (Protocol Independent
Multicast)
R
remote-as command
peer submode, remote-as command
MCC-57
RFC 2236, extensions for IGMP MCC-5
RFC 4601, motivation for and architecture of PIM MCC-7
router igmp command MCC-21, MCC-38, MCC-46
router mld command MCC-21, MCC-38
router mld submode, nsf lifetime command MCC-38
router msdp command MCC-21, MCC-56, MCC-59, MCC-62
router msdp submode
cache-sa-state command
MCC-59
connect-source command MCC-56, MCC-68
default-peer command MCC-56
mesh-group command MCC-56
originator-id command MCC-56
password command MCC-62
peer command MCC-56, MCC-62
remote-as command MCC-56
sa-filter command MCC-59, MCC-68
ttl-threshold command MCC-59, MCC-68
router pim command MCC-21, MCC-28, MCC-30, MCC-32,
MCC-38, MCC-45, MCC-51
router pim submode
auto-rp candidate-rp command
MCC-30
auto-rp mapping-agent command MCC-30
bsr candidate-bsr command MCC-32
bsr candidate-rp command MCC-32
interface command MCC-32
nsf lifetime command MCC-38
rp-address command MCC-45, MCC-47