2. DIVING TIME MEASUREMENT
Diving time measurement automatically starts
when the depth measurement is 1.0m (4ft) or
deeper, and stops when the depth measure-
ment is within 1.0m (4ft).
However, if the depth returns to 1.0m (4ft) or
deeper within 10 minutes, measurement of the
diving time continues to be displayed from the
point when it was stopped.
Diving time measurement:
within 100 minutes: minutes and seconds
100 minutes or more: minutes
Diving time display range:
0 minutes 00 seconds - 399 minutes
Diving time measurement range:
0 minutes 00 seconds - 400 minutes (repeated)
43
1. DEPTH METER DISPLAY
The first water depth measurement is taken at
1.0m (4ft.) and displayed; measurement is
done every second and is displayed.
Unit of water depth measurement ... 0.1m (1ft)
Measurement range ... 1.0m - 80.0m (4ft -
260ft)
When water depth is within 1.0m (4ft):
display reads 0.0m (0ft)
When water depth is over 80.0m (260ft):
display reads ---
When ER and the depth are alternately
displayed during a dive...
This indicates that there is something wrong
with the depth measurement.
ER and the depth are alternately displayed
until Dive Mode is ended.
42
To Next Page
Loading...
Need help?
General
