B. NAMES AND FUNCTIONS OF PARTS
- Read in conjunction with the watch diagram at the beginning of this
manual.
16
17
Name
A
: Button
A
Press once
Press for 2 seconds or more
B
: Button
B
Press once
Press for 2 seconds or more
M
: Button
M
Press once
Press for 2 seconds or more
1: Digital display
2: Crown
3: Hour hand
4: Minute hand
5: Second hand
Time Modes
Time/Calendar
Switches between hours, minutes/seconds/date, day
—
—
To time/calendar adjustment status
To Alarm Mode
To Diving Modes
A/P, hours, minutes/seconds/date, day
Use to adjust the analog time
Normally shows “hours”
Normally shows “minutes”
Normally shows “seconds”
Time Modes
Alarm Chronograph
ON/OFF Start/Stop
——
— Split time/Reset
To alarm set time adjustment —
To Chronograph Mode To Time/Calendar Mode
To Diving Modes To Diving Modes
A/P, hours, minutes or OFF Minutes, seconds, 1/100 seconds
Use to adjust the analog time
Normally shows “hours”
Normally shows “minutes”
Normally shows “seconds”
6: Rotating bezel ...You can use this rotating bezel to approximately measure
the diving time and remaining time.
7: Pressure sensor ... Senses water pressure to measure the depth.
To Next Page
Loading...
