Citizen C650 - Setting the Date

9. Setting the Date (Date is corrected by digital
display)
1. Turn the crown and set the mode hand to the calendar [CAL] mode.
2. Press either button (A) or button (B) to access the city to be corrected.
3. When the crown is pulled out to the second click (date setting position), the
watch enters the date correction state.
4. When button (A) is pressed, the location to be corrected changes each time it
is pressed. Select the location to be corrected so that it is flashing.
• When the crown is turned forward (clockwise), correction is made in the
positive direction. When the crown is turned backward (counter-clockwise),
correction is made in the negative direction. Turning the crown continuously
allows corrections to be made rapidly.
5. After corrections have been completed, return the crown to the normal
position.
24 25
Switching daylight
savings time
Seconds
Minutes
Hours
Switching 12H/24H time
<Normal Time Display>
Crown pulled
out to second
click
Crown
returned to
normal position
<Time Correction State>
(A)
(A)
(A)
(A)
Mode hand
(A)
Notes:
1. Daylight savings time can be set for each city.
2. When the time is set for any one city, the
times of other cities, including UTC time, are
corrected automatically.
3. When changing the time, the crown and
buttons do not respond even if operated.
Ensure that the required procedures have
been performed correctly by first checking
that the time has changed.