Citizen C650 - Using the Timer

34
<Using the Timer>
1. Press button (A) to start the timer.
2. Pressing button (A) again during measurement stops the timer.
3. Pressing button (B) during measurement returns the watch to the timer initial
setting display and resumes measurement.
4. Pressing button (B) when the timer is stopped returns the watch to the timer
initial setting display.
35
12. Using the Timer
The timer can be set to a maximum of 99 minutes in 1 minute units. When the
set time has elapsed, a tone indicating that the set time is up sounds for about 5
seconds, after which the timer returns to the timer initial setting display.
<Timer Initial Setting Display> <Setting the Timer>
1. Turn the crown to set the mode hand to the
timer [TMR] mode.
2. Pull out the crown to the second click (timer
setting position) to enter the "minutes"
correction state.
3. When the crown is turned forward (clockwise)
in the "hours" or "minutes" correction state,
correction can be made in the positive
direction. When the crown is turned backward
(counter-clockwise), correction can be made in
the negative direction.
4. After setting, return the crown to the normal
position.
Initial setting display Measurement Stopped
(A)
(B)
(A)
(A)
(B)
(A)
(B)