<Order in which Registered Cities are Displayed>
The location having the same time difference among the 30 cities pre-registered
in this watch is displayed first. However, a city is not displayed if the time
difference of a registered city has not been set.
<Canceling Registered Cities>
1. Turn the crown to set the mode hand to the zone setting [SET] mode.
2. When the crown is pulled out to the second click (city setting position), the
watch enters the city name correction state.
3. Turn the crown to change the display of the registered city name to "-- -- --".
4. After canceling registration, return the crown to the normal position.
14. All-Reset
When this watch indicates an abnormal display or does not function properly (no
display, alarm continues to sound, etc.) as a result of being subjected to the
effects of static electricity or strong impact and so forth, perform the all-reset
procedure described below.
When performing the all-reset procedure, first make sure that the watch is
sufficiently charged and that the charge indicator is lit.
42 43
To Next Page
Loading...
