3. The letters of city names are displayed by turning the crown. Turn the crown
to display one letter of the city name to be set for the third letter of that city
name.
• Turning the crown continuously causes the letters to advance rapidly.
4. After setting the third letter, press button (A) to switch the letter of the city
name to be corrected. Then set the remaining first and second characters of
the city name.
5. When button (A) is pressed during the correction state of the first character of
the city name, the watch enters the correction state for the time difference
from UTC.
6. Turn the crown to display the time difference.
• Time differences can be set in 1 hour units. They cannot be set in 30 minute
units.
7. After setting, return the crown to the normal position.
<Characters and Symbols Used in City Names>
• Letters of the alphabet (A to Z)
• Numbers (0-9)
• Symbols (--: hyphens, : blank spaces)
<Display Sequence>
When the crown is turned forward (clockwise), the display changes in the order
of letters (A-Z), numbers (0-9) and then symbols ( : blank spaces, --: hyphens).
When the crown is turned backward (counter-clockwise), the display sequence
is opposite that when turning the crown forward.
40 41
To Next Page
Loading...
