13. Using Zone Setting
The zone setting function enables only those cities for which "SET" has been
selected to be easily accessed (displayed) in each mode. Daylight savings time
can be also be set for each city. In addition, the user is also able to arbitrarily
registered one “city and time difference in 1 hour units”.
Note:
• Time differences cannot be set in 30 minute units (as in the case of central
Australia, India and Newfoundland, Canada).
<Using Zone Setting>
1. Turn the crown while in the normal position and set the mode hand to the
mode setting [SET] mode.
2. The city can be changed by pulling out the crown to the first click (for
changing cities between SET and OFF and for setting the location for
switching to daylight savings time).
3. Turn the crown to access the city to be set.
• Turning the crown continuously causes the cities to advance rapidly.
4. Press button (A) to set the city and press button (B) to set daylight savings
time.
5. After setting, return the crown to the normal position.
36 37
(B)
(A)
Normal position
1st position
To Next Page
Loading...
