Citizen CMP-30 - 1 Introduction; Document Target Range; Supported Environment; Firmware

CITIZEN CMP-30 (LBTIU) Setup Manual
2
1. Introduction
This document is the setup manual for the Citizen CMP-30 LBTIU printer.
1.1. Document target range
This document is intended to be use by Church Community Builder customers to pair their Citizen
CMP-30 LBTIU with their Check-In application.
1.2. Supported environment
This manual assumes that it is being applied in the following environment:
Operating System: iOS 9.3 or later
Interface: Bluetooth
Media: CCB app does not support blackmark labels!
1.3. Firmware
The firmware version of the printer has to be v2.03 HLB or newer.