Citizen CT-S651 Series - Page 11

CT-S651 Series Service Manual
- 9 -
7. Disassembling “SA, FRONT COVER-02”
Remove two “SCREW, BHT (ST), M3.0 × 6” that fasten “SA, FRONT COVER-02” and “SA, MAIN
FRAME” and disconnect “SA, OPEPANE CABLE F” from the connector.
Remove “HOLDER, FRONT COVER-02” from “SA, FRONT COVER-02”.
Remove “HOLDER, FRONT COVER-02” while pulling its side edge outwardly.
8. Disassembling “SA, CASE-02”
Remove two “SCREW, BHT (ST), M3.0 × 6” that fasten “SA, CASE-02” and “SA, MAIN FRAME”.
Raise the front edge of “SA, CASE-02” while slightly pressing “POWER SW” at the front.
SCREW, BHT (ST), M3.0 × 6
SA, OPEPANE CABLE F
SA, FRONT COVER-02
HOLDER, FRONT COVER-02
SCREW, BHT (ST), M3.0 × 6