Citizen CZ-01

19
Printer Installation
Caution
• Make sure that the trash box is installed when printing. If not installed, your ngers
may get caught in the moving parts and be injured.
• If different width media, for example 4-inch and 4.5-inch, are used on the same
printer, problems with the print quality such as lines on the print could arise.
Therefore, do not mix the use of di󰀨erent width media on one printer.
• Make sure to perform paper initialization during paper replacement. If paper
initialization is not performed, problems with the print quality could arise.
• Do not touch the paper during printing. The edge of the paper may cause injury, and
problems with the print quality could arise.
Caution
• If the trash box is not closed, the ERROR LED ashes red.
Make sure to close the trash box, ensuring that there is no gap between it and the
printer unit.
A gap between the trash box and the printer unit can result in malfunctions.
It can also result in foreign objects or dust getting into the printer unit, adversely
a󰀨ecting print quality.
Trash
box
LEDs
10
Attach the printer unit’s trash box.
Perform paper initialization. (Three blank sheets are output.)
Paper initialization cuts o󰀨 the outer edges of the paper that may be dirty.
However, paper initialization will not be carried out if the printer unit's ON/OFF switch
is set to ON after the paper is replaced.
Printing is not possible with the trash box removed.