14
Prepare the media (paper, ribbon) with the following widths.
Printer Installation
Caution
• Set the paper and ribbon without putting them directly on the work surface. If dust or dirt
adheres to the media when setting it inside the printer unit, it may adversely aect the print
quality.
Media (ribbon, paper)
When using 4.5-inch paper, remove the spacers attached to the paper holder.
Removing the spacers
1 2 3
Spacer
Size Paper Ribbon
4-inch Width : 102 mm Width : 109 mm
4.5-inch Width : 114 mm Width : 121 mm
Caution
• Do not put your ngers between the paper holders and spacers. Otherwise, you may get
injured.
To Next Page
Loading...
Need help?
General
