To Next Page
S
skinneranthonyAug 3, 2025
How to fix 'Ribbon error' on Citizen CZ-01?
- EElizabeth CarterAug 3, 2025
If your Citizen Printer displays a 'Ribbon error', it means the ribbon is not properly set. To fix this, set the ribbon correctly.
How to fix 'Ribbon error' on Citizen CZ-01?
If your Citizen Printer displays a 'Ribbon error', it means the ribbon is not properly set. To fix this, set the ribbon correctly.
What to do if my Citizen Printer POWER ERROR flashes red and orange?
If your Citizen Printer is flashing red and orange alternately with a POWER ERROR, it usually means there's no paper. To fix this, set the paper properly and then close the trash box and/or top door.
What to do when Citizen Printer shows 'Ribbon end' error?
If your Citizen Printer displays a 'Ribbon end' error, it signifies that the ribbon has run out. You should set a new ribbon to continue printing.
Why does my Citizen CZ-01 show a 'Paper error'?
If your Citizen Printer is showing a 'Paper error', the paper may not be set correctly. Ensure that the paper is set properly.
What to do if Citizen CZ-01 says 'Trash box is open / Top door is open'?
If your Citizen Printer displays this error, ensure that both the trash box and top door are completely closed.
How to resolve 'Media size error' on Citizen CZ-01?
If your Citizen Printer shows a 'Media size error', it means the data size you're sending doesn't match the media size set on the printer. To resolve this, send data with a size that matches the media size that has been set on the printer.
General| Print Resolution | 203 dpi |
|---|---|
| Print Speed | 80 mm/s |
| Power Supply | AC 100-240V, 50/60Hz |
| Print Technology | Thermal |
| Print Size | 58mm |
| Interface | USB |
| Paper Width | 57.5 ±0.5mm |
Essential safety guidelines for connecting the power cord to prevent electric shock or fire hazards.
Notes on safe product usage, including avoiding remodeling and understanding copyright.
Defines the meaning of warning and caution symbols and their associated risks.
Details crucial environmental conditions and placement requirements for safe installation.
Step-by-step guide for installing the ribbon and preparing it for printing.
Explains how LED status lights indicate different product conditions and errors.
Provides general steps to address various printer issues.
Detailed steps for safely removing jammed paper from the printer.
