2 Preparation
11
2-3. Connecting the Interface Board Unit
1) The interface board can be used by connecting it to the main board of the printer.
It is connected by plugging the printer interface connector into the connector on the printer's main
board. It is possible to replace the other interface with the LAN interface, but extra caution is required.
(Diagram below shows a typical example)
2) If another interface board is installed in the printer, remove
it.
• Malfunctions may occur if the interface board is removed or re-inserted.
• To install the interface board, please contact your dealer or service person.
• If you replace the interface board by yourself, do so at your own risk, taking care to avoid
static electricity, etc.
Warning
Printer interface connector
Operation panel
To Next Page
Loading...