Citizen IF1-EFX1 - XML Print and Peripheral Control Functions; Overview of XML Print and Device Control

38
6. XML Print / Peripheral Device Control Function
6-1. Overview
The XML Print / Peripheral device control function are functions of this interface board to convert
specific data in XML tag format to implement functions such as printing.
The peripheral device control function is a function to control a device connected to USB ports of the
interface board by using data in XML tag format. (A method to control a peripheral device without
using the XML function is also provided.)
See the separate documents for CITIZEN XML Print Service for details on data in XML tag format,
JavaScript library to generate that data, etc.
This function can be used when the following conditions are met.
Printer supports the XML function.
This interface is connected.
The firmware version of the printer and this interface board supports XML function.
If the conditions are met, the Service Status tab is displayed in the STATUS window and the Service
tab & SSL/TLS tab are displayed in the CONFIG window.
When using these functions, the URL to which the XML tag format data is sent is as follows.
If you use the URL specification method by port number, the numeric part will change depending on
the port number setting.
URL
HTTP
XML Print
service
http://IP
address:8080/
http://IP
address/xmlprint/
XML Device
service
http://IP
address:8085/
http://IP
address/xmldevice/
XML Config
service
http://IP
address/xmlconfig/
HTTPS
XML Print
service
https://IP
address/xmlprint/
XML Device
service
https://IP
address/xmldevice/
XML Config
service
https://IP
address/xmlconfig/