Citizen IF1-EFX1 - STATUS Request Print Tab Information; Printing System Log for Troubleshooting

4 Request Print function
62
・ Password
Enter the password to be used for Basic Authentication.
Warning print for failed Requests
If communication with the server for the request print fails, this board can notify you of it by printing
or beeping.
・ Number of allowed failure before warning (Default: 0)
Enter the number of consecutive failures before an alarm printout is executed.
If 0 is entered, the alarm printing function is disabled.
・ Beep for warning（Default: Disable）
Sets whether to enable the buzzer function for alarm printing.
8-3. STATUS>>Request Print Tab
The settings on the Request Print tab and the connection status of peripheral devices are shown
here.
8-4. Printing system log
If Request Print did not work as expected, you may be able to check the situation by checking
the system log of this board.
Please refer to Chapter 5 "Useful Functions for Request Print" in the "Programmer's Manual for
"Request Print" for a description of system log printing.