2 Network Settings and Operation
14
XML Config
By sending XML format data to this interface board, you can configure some of the board's
functions.
The functions that can be configured or updated are
SSL/TLS settings
Request printing settings
Firmware update
Details are beyond the scope of this manual. Therefore, please refer to the manual of XML
Config SDK for details.
JavaScript and Excel VBA macros are available as sample programs for this function.
The timeout setting for this function is present in the 6-2 CONFIG>>Service Tab.
Warning
After the firmware upgrade starts, do not disconnect power or transmission to the printer until the
upgrade is complete.
When updating the firmware, it is necessary to obtain the correct firmware data from us.
If the firmware is not updated correctly, this interface board may not boot.
To Next Page
Loading...