4 NetToolK
34
③ ”Help” menu
Select “Help” – “About” to display the version information of the NetToolK.
④ ”Refresh List” button
Refresh the list of the LAN interface board. The application periodically refreshes the list, but
you can refresh the list manually by clicking this button.
⑤ ”Go to Web Page” button
Select the LAN interface board you want to configure, and then click “Configure using a web
browser”. The browser starts and displays the Web manager.
⑥ ”Configure the LAN Board” button
Select the LAN interface board you want to configure, and then click “Configure the LAN
Board”. See 5-3 Setup Window (page 35).
⑦ LAN interface board list
The list displays the LAN interface boards connected to the network. The LAN interface boards
connected to the same subnet are displayed.
To Next Page
Loading...