CITROEN 2015 Berlingo Multispace

Audio and Telematics
259
TECHNOLOGY on BOARD
10
Berlingo-2-VP_en_Chap10a_SMEGplus_ed02-2015
The services available depend on
thenetwork,theSIMcardandthe
compatibilityoftheBluetoothtelephone
used.Checkthetelephonemanualand
withyournetworkproviderfordetailsof
theservicesavailabletoyou.
Theabilityofthesystemtoconnect
with only one profile depends on the
telephone.Thethreeprofilesmayall
connectbydefault.
Visitwww.citroen.co.ukformoreinformation
(compatibility,additionalhelp,...).
The recognised telephone
appearsinthelist.
Dependingonyourtelephone,youmaybe
askedtoacceptautomaticconnectionevery
timetheignitionisswitchedon.
On return to the vehicle, if the last telephone
connected is present again, it is reconnected
automaticallyandwithinaround30seconds
after switching on the ignition the pairing is
done without any action on your part, with
(Bluetoothactivated).
Tomodifytheautomaticconnectionmode,
select the telephone in the list then select the
desiredprofile.
Depending on the type of telephone,
thesystemwillaskyoutoacceptornot
thetransferofyourcontacts.
If not, select "Update".
Connecting a Bluetooth
®
peripheral device
Automatic reconnection
On switching on the ignition, the telephone
connected when the ignition was last switched
offisautomaticallyreconnected,ifthis
connectionmodehadbeenactivatedduringthe
pairingprocedure.
Theconnectionisconfirmedbythedisplayofa
messageandthenameofthetelephone.
Manual connection
Press on Telephone to display the
primarypage.
Pressonthesecondarypage.
Select "Bluetooth" to display the list
ofpairedperipherals.
Selecttheperipheraltoconnect.
Press on "Search".
Theconnectionisconfirmedbythedisplayofa
messageandthenameofthetelephone.