CITROEN 2015 Berlingo Multispace User Manual

52
Berlingo-2-VP_en_Chap03_Pret-a-partir_ed02-2015
Gearbox and steering wheel
Berlingo-2-VP_en_Chap03_Pret-a-partir_ed02-2015
Acceleration
Foroptimumacceleration(e.g.to
overtakeanothervehicle),simply
press the pedal beyond the point of
resistance at the end of its travel, by
pressingdownrmly.
Vehicle stationary, with the
engine running
In the event of a prolonged stop with
the engine running, the gearbox
changesautomaticallytoneutralN.
Stopping the vehicle
Before stopping the engine, put the
gear selector in position N.
In all cases, it is essential to apply
theparkingbrake.Checkthatthe
parkingbrakewarninglampisoninthe
instrumentpanel.
Before doing anything in the
enginecompartment,checkthat
the gear selector is in neutral N.
Changing gear
In situations of high engine speeds
(heavy acceleration), a change
up will not occur unless the driver
operates the electronic gearbox control
paddle.
Pull on the "+" control
paddletochangeup.
Pull on the "-" control
paddle to change
down.
- If the vehicle stops or reduces
speed(forexamplewhen
approaching a stop sign),
the gearbox changes down
automatically,torstgearif
needed.
- It is not necessary to release the
acceleratorcompletelyduringgear
changes.
- A gear change instruction is
accepted only if the engine speed
permits.
- For safety reasons, depending on
the engine speed, a change down
maybeperformedautomatically.
Manual mode
Changing to manual mode
Move the gear selector to M.
Automatic mode
Changing to automatic
mode
Move the gear selector to A.
The gearbox then operates in
automaticmode,withoutanyactionon
yourpart.
It constantly selects the gear that is
bestsuitedtothefollowingconditions:
- driving style,
- roadprole,
- optimumfuelconsumption.

CITROEN 2015 Berlingo Multispace Specifications

General

Brand	CITROEN
Model	2015 Berlingo Multispace
Category	Automobile
Language	English