CITROEN 2015 Berlingo Multispace - Page 93

91
EASE OF USE and COMFORT
4
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
Seats
Berlingo-2-VP_en_Chap04_Ergonomie_ed02-2015
Operating the Row 3 seats
Removing the seat
- Lowertheheadrestraint.
- Place the seat in the fully folded
position.
- Tilttheentireseatforwards.
- Oneachside,takeholdofthe
uprights of the folded seat, tilting it
forwardslightly,andliftit.
Retting the seat
The label on the seat indicates the
positioninwhichitmustbeinstalled.
- Placethehooksofthefrontfeet
betweenthetwobars.
- Ensurethatnoobjectorfootis
obstructing the rear anchorage
points and that the seat belt is
positioned correctly and available
foruse.
- Foldbacktheseattoxitsrear
anchoringfeet.
- Operate the control to raise the
seatbacktoitsinitialposition.
- Raisetheheadrestraint.
Good practice
Followingthevariousoperations:
- donotremoveaheadrestraint
without stowing it; secure it inside
the vehicle,
- ensure that the passengers can
always access the seat belts and
fastenthemeasily,
- passengersmustnevertake
theirseatwithoutadjustingand
fasteningtheirseatbelt.
- apassengerseatedinrow3must
ensure that he does not obstruct
the row 2 seat anchorage points,
- apassengerseatedinrow3must
nothavetheseatinfrontofthemin
row 2 in the folded position; this is
in case the seat could tip towards
the passenger unexpectedly and
injurethem.
Donotplacehardorheavyobjectson
theseatbacksformingatable,they
couldbecomedangerousprojectilesin
theeventorsharpbrakingorimpact.