CHARACTERISTICS
1. Water circuit :
Self de-aerating type, with header tank.
- Filling :
. . . . . . . .._................................................................................................................
Cap on header tank
- Level (Cold, iu de-upruled
state ) : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
See mark in header tank
- Coolant : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..
Water + anti-freeze
- Circuit protection :
- 15” C ( 28 -: of anti-freeze )
. . . . . . . . . . . . . . . . . . . . .
30” C ( 50 ? of anti-freeze )
2. Radiators :
Surface of radiator :
- cx 2000 ( -
11 1975 ) Except optional towing equipment
: . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16 dm2 ( 248 sq.in )
- cx 2000 ( -
I/ I’)75 ) optional towing equipment
: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 dm2 (310 sq.in)
- cx 2000 ( 1/ 1975
- ) and CX 2200 : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20 dm2 ( 310
sq.in )
- CX Prestige, except optional torque converter-air conditioning :
. . . . . . . . . . . . . . . . . . . . . . . . . . 20 dm2 ( 310 sq.in )
- CX 2400, except Injection and optional torque converter-air-conditioning :
. . . . . . . . 20 dm2 (310 sq.in)
- CX 2400 torque converter - air-conditioning + CX 2400 GTi :
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 dm2 ( 356.5 sq.in )
- CX
E
Prestige torque converter
- air-conditioning : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23 dm2 ( 356.5 sq.in )
8
-7
NOTE : Radiators originally fitted to the vehicles differ according to the type of vehicle on which they are fitted,
co
_- 03
in the material used for the coolant channels, and the distance between the cooling fins.
T
2
3. Radiator cap (or pressure relief valve) calibration (rap
scwzmcl 011) :
. . . 1 bar (14.5 psi)
I 4. Thermostat :
- Make : ..............................................................................................................................
CALORSTAT
- Reference No :
................................................................................................................
V 6215
- Begins to open at :
........................................................................................................
84’ C
5. Thermal switch for temperature warning lamp (011
cyli~~d(,r-hc~ad)
- The warning lamp lights up (on the, ivstrrlmeut pnr~(,I) at the following temperatures :
- 16 dm2 (248 sq.in) radiator :
. . . . . . . . . . . . .
Ii3 to 117O c
- 20 and 23 dm2 (310 and 356.5 sq.in) radiators :
. . . . 110.5 to 113.5” c
- Tightening torque :
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . .
2.5 to 3 da Nm (18 to 21.5 ft.lbs)
NOTE :
The coolant return hose for the heater unit has a white identification mark painted on it.
Make sure heater hoses are correctly fitted to the heater unit.