OPERATION No MA. 454-O : Ch
ec tzg and a&sting the handbrakc
k’
Screw down cable adjusting nut (2) against
lever ( 1)
Tighten lock nut ( 3) to 1.5 doNm ( llft.lb)
4. Checking tie handbrake :
Operate handbrake lever several times.
Check that adjustment does not change and that
locking system operates satisfactorily.
5. Refit front wheels :
Tighten screws from 6 to 8 daNm ( 43 l/2,
ta 58 ft.lb ).
Lower the vehicle to the ground.
To Next Page
Loading...
