2
OPERATION No MA. 852.0 : Acfirrr~isg /hr,
bos,rv/
I
II. UNLOCKING A BONNET
(when interior control is disconnected )
‘I
NOTE :
-!
It is possible to unlock (I bonnet when the control
has become discpnnected, because either :
- the control cable is not attached to the catch,
or the cable is broken.
Introduce tool MR. 630-84/21 into the lower front
ventilation grille.
Shine
a lighf on tbc bonnrl lock though the radia/or
grille..
Engage the point of the tbol into the lock protection
housing (1 ) from the rear and exert pressure in the
dire&on of arrow CC F n on the catch of the lock in
order to unlock
To Next Page
Loading...
