CKD ABSODEX AX9000XS-U2 - Defining the CC-Link Register

3. CC-Link Communication Function
[SMF-2008-A]
– 3-10 –
3.4. Defining the CC-Link Register
Enter the station number and baud rate using AX Tools Ver 2.10 or later.
The default station number is 1 and the default baud rate is 4 (10 Mbps).
i) CC-Link setting screen
Select "Setting" - "CC-Link" from the menu of the AX Tools to open the "CC-Link Setting
Register" screen.
Fig. 3.5. Setting menu of AX Tools
ii) CC-Link setting register
Check that a value is displayed on the CC-Link register setting and select “Setting
(ABSODEX)”.
Fig. 3.6. Setting screen of CC-Link register
<Station number setting>
The current station number setting is displayed. The current station number setting is
displayed.
<Baud rate setting>
The current baud rate setting is displayed.
Select the desired one among 0 (156kbps), 1 (625kbps), 2 (2.5Mbps), 3 (5Mbps) and 4
(10Mbps).
<CC-Link register setting>
The specified values of the station number and baud rate registers are displayed.
<Setting (ABSODEX)>
Click on this button to transfer new data to the register of ABSODEX.
<Close>
Click on this button to close the screen.