3. CC-Link Communication Function
[SMF-2008-A]
– 3-17 –
3.8. 7-segment LED Indication
A station number is indicated on the 7-segment LED. The flow after the power is turned on is as
shown in the following.
Fig. 3.19. 7-segment LED indication specifications
AXドライバの制御電源ON
運転モードを表示する
シリアル通信の局番を表示する
※局番の表示では、「．」を表示しません
※アラームが発生すると、アラームコードを表示する
AXドライバの制御電源OFF
The control power of the AX driver is turned on.
The operation mode is displayed.
The serial communication station number is displayed.
* "." is not shown when the station number is displayed.
* The alarm code is displayed when an alarm occurs.
The control power of the AX driver is turned off.
To Next Page
Loading...