CKD AX9000TS-U6 - Page 27

7
．
EtherNet/IP Connection Procedure
24
4
In the same way as steps 2 and
3, enter the following data in
newly added rows.
- Name:
EIP002_MonitorCode_OUT
Data Type: DINT[3]
Network Publish: Output
- Name:
EIP002_Command_OUT
Data Type: DINT[3]
Network Publish:
Output
5
In the same way as steps 2 and
3, enter the following data in
newly added rows.
- Name:
EIP002_OutputSignal_IN
Data Type: BYTE[8]
Network Publish: Input
- Name:
EIP002_MonitorData_IN
Data Type: DINT[3]
Network Publish: Input
- Name:
EIP002_Response_IN
Data Type: DINT[3]
Network Publish:
Input
6
Select Export Global Variables
– Network Configurator from
the Tools Menu.
7
The Save As Dialog Box is
displayed.
Select a location to save the file,
and enter a file name (example:
EIP002).
Check that the file type is CSV
(Comma delimited) (*.csv).
Click Save.