3 2023-09-22 SM-A63469-A/2
FOR SAFETY OPERATION
When designing or manufacturing equipment incorporating this product, you are obligated to
manufacture safe equipment. To do so, check that the mechanism of the equipment and the
electric control for controlling the mechanism assure the safety of the system.
For safety of the design or management of the equipment, strictly observe the organization
standards and the regulations.
To operate our product safely, selection, operation and handling of the product, and adequate
maintenance procedures are important.
Be sure to observe the description given under WARNING and precautions to assure safety of
the equipment.
Various safety measures are taken for the product, however, handling that is not described in
this instruction manual could lead to an accident. Before using the product, read this instruction
manual carefully and gain full understanding of the contents.
To clearly indicate the degree of harm and damage and the possibility of their occurrence,
precautions are divided into three categories: “DANGER,” “WARNING,” and “CAUTION.”
DANGER
A case where if handling is wrong, it is assumed that an
imminent dangerous situation due to which a death or serious
injury may be caused will occur.
WARNING
A case where if handling is wrong, it is assumed that a
dangerous situation due to which a death or serious injury
may be caused will occur.
CAUTION
A case where if handling is wrong, it is assumed that a risk
due to which an injury or physical damage may be caused will
Even items described under CAUTION may cause serious results.
Observe each item without fail because these safety precautions are important.
To Next Page
Loading...
