CKD GPS3 Series - Page 17

４．４．４ 0-pointcalibration
△+▽(2secondsormore)tosetthedetectionsidepressure0-pointcalibration.
0-pointdriftcanbecalibrated.
SetthesupplypressuretoOFFbeforemakingthissetting.
Note)Er2willbedisplayedonthemainscreenifthisisoutsidetheconfigurablerange.
４．４．５ Keylock
PressandholdSET+△+▽(2secondsormore)toconfigurekeylockandreleasesettings.
Takecareduringbuttonoperationtoensurethateachsettingisnotmodifiedincorrectly.
OPERATION
４
[SM-P00143-A] −16−