CKD GPS3 Series - OS Mode

４．５．３ CH2thresholdsetting （Factorydefault:50）
CH2thresholdshouldbesettonodisplayortoavalueinthetablebelow.
４．５．４ SettingCH2hysteresis （Factorydefault:10）
CH2hysteresiscanbesetfrom1to20.
４．６ OSmode
●Setsothersettings.
RegularoperationishaltedwhenenteringOSmode.
Note)Outputsretaintheirstatusasofwhenthemodewasentered.
(1)OSmodelist
(2)MovingtoOSmode
PressandholdSET(4secondsormore)tomovefromthenormalscreentoOSmode.
AftermovingtoOSmode,use△or▽toswitchamongsettingitems.
(3)Returningtothenormalscreen
PressandholdSET(2secondsormore)tomovetoRUNmode.
OPERATION
４
[SM-P00143-A] −18−