7
The side knife is easily attached with
a simple twist lock turnbuckle.
Both the side knife and the divider use the
new fork locating and locking device (2).
Side Knife
Installations
Simply slide into the lock and ¼ turn
the handle to lock in place (1).
Once the side knife is fitted and locked, all that is required is for two drive pipes
to be connected to the valve block on the side of the cutterbar. Once these are
fitted and the side knife is correctly/securely locked, the sensor engages the
solenoid and allows oil to flow through; thus removing the need to link pipes or
disengage drives on previous headers.
To Next Page
Loading...
