EasyManuals Logo

Claas LEXION User Manual

Claas LEXION
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
299 211.0 - RHB klappbares SW 4,50 m - 5,40 m LEXION 1.2.3
Safety Rules
Service
1. Repair, service and cleaning work and the
elimination of malfunctions should only be
performed with the drive and the tractor
engine switched off – remove the ignition key!
2. Escaping fluid (fuel or hydraulic oil) under high
pressure can penetrate the skin and cause
serious injury. In such a case, consult a doctor
immediately as otherwise serious infections
may result!
3. Dispose of oil, fuel and filters in a way that is
harmless to the environment and in accordance
with existing anti-pollution regulations!
4. Only have qualified workshops carry our repair
work on the hydraulic system!
Basic rule
Always check the operating and road safety of the
cutterbar before using it.
Hydraulic accumulators
Take particular care when working on hydraulic
accumulators! Hydraulic accumulators are under
high pressure!
In the case of valve-controlled accumulators such
as e.g. for the Autopilot, the short-circuit screw has
to be loosened before starting repair work on the
accumulator. This is necessary to dump the
hydraulic pressure.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Claas LEXION and is the answer not in the manual?

Claas LEXION Specifications

General IconGeneral
CategoryCombine Harvester
ManufacturerClaas
Engine PowerUp to 790 hp
Grain Tank CapacityUp to 18, 000 liters
Threshing SystemAPS HYBRID SYSTEM

Related product manuals