Clarion CMD6 User Manual

XM Satellite Radio Operations
English
30 CMD6
Receiving stations selected by
category
Satellite Radio allows you to select broadcast
channel category (contents).
1. Press and hold the [SAT] button (1 sec.) to
select the category selection mode.
 It press once again, return to the channel
selection mode.
2. Turn the [UP/DOWN] knob to change the
category item.
3. Press the [X] or [V] button to tune in a
station.
Notes:
• When the category selection mode is entered,
the category of the last received channel is
displayed first.
• The category selection mode is canceled when
no channel with the selected category can be
found.
•The [X] or [V] button are not pressed within
7 seconds, the category selection mode is
canceled, and resumes to the channel mode.
Scan function
There are two scan modes: the category scan
mode and the preset scan mode.
During scanning channels are displayed in
abbreviated form, the display mode cannot be
switched.
 This function is available in the channel selection
mode.
● Preset scan (PRESET SCN)
A preset scan scans the channels (up to 18
channels) stored in the preset memory about
every 10 seconds.
1. Press the [OPTION] button.
2. Press the [X] or [V] button to select
“PRESET SCN”.
3. Press the [ENTER] button.
And start the preset scanning.
● Category scan (CAT SCN)
In a category scan, broadcast channels in the
same category as the current channel are
selected about every 10 seconds.
1. Press the [OPTION] button.
2. Press the [X] or [V] button to select “CAT
SCN”.
3. Press the [ENTER] button.
And start the category scanning.
Note:
• Category scanning is not available when no
category is defined for the current channel.

Clarion CMD6 Specifications

General

Brand	Clarion
Model	CMD6
Category	Marine Equipment
Language	English