Clarion CZ215E User Manual

System Setup
13
CZ215E/CZ315E
English
display, then turn [ROTA RY] knob to
choose one of the paired devices.
3. Press [ROTARY] knob.
4. Turn [ROTA RY] knob to select
“CANCEL” or “ARE U SURE”, and
press [ROTARY ] knob.
CANCEL: cancel deleting the paired
device.
ARE U SURE: confirm to delete the
paired device.
Notes:
•฀Deleted฀paired฀device฀will฀not฀automatically฀
rearrange฀in฀the฀paired฀device฀list.
•฀After฀deleting฀the฀device,฀the฀phone฀book฀
and฀the฀call฀history฀records฀will฀be฀deleted฀
too.
Disconnect Device
This option is used to disconnect the
currently connected device.
1. Select “BT DISCON” in system setup
items, and press [ROTARY] knob.
2. Press and turn the [ROTARY] knob to
select “ARE U SURE” or “CANCEL”.
ARE U SURE: confirm to disconnect
the paired device.
CANCEL: cancel disconnecting the
paired device.
3. Press the [ROTARY] knob to confirm.
Auto Answer
This is a setting to determine whether
any incoming call will be automatically or
manually answered.
∗
The factory default setting is “OFF”.
1. Select “A-ANSWER” in system setup
items.
2. Turn [ROTA RY] knob to select “ON” or
“OFF”.
ON: Any incoming call is automatically
answered in 5 seconds.
OFF: User needs to manually answer
the call.
Auto Connect
This function allows the Bluetooth to be
connected automatically with previously
connected device. Connection can be
established at any source mode.
∗
The factory default setting is “ON”.
1. Select “A-CONNECT” in system setup
items.
2. Turn [ROTARY ] knob to select “ON” or
“OFF”.
Priority for Phonebook
Download
Setting the priority for the phonebook
download automatically while pairing.
∗
The factory default setting is “DEVICE”.
1. Select “TEL MEMORY” in system setup
items.
2. Turn [ROTARY ] knob to select the
setting: DEVICE/SIM.
DEVICE: Phonebook download from
device firstly.
SIM: Phonebook download from SIM
card firstly.
Pin Code Setting
This pin code is used during pairing. A
maximum of 10 digits can be changed
through this unit.
∗
The factory default pass key is “1234”.
1. Select “PIN CODE” in system setup
items.
2. Press [ROTARY] knob.
3. Press [
x
] or [
v
] button to move the
cursor.
4. Turn [ROTARY ] knob to select the
desired digits.
5. Long press [ROTARY] knob to store in
memory.
Performing Memory Reset
Reset various settings in the memory.
Note:
•฀The฀settings฀will฀remain฀in฀the฀memory฀
even฀if฀you฀turn฀the฀power฀off฀.
1. Select “RESET” in system setup items,
and press [ROTARY ] knob.
2. Turn [ROTARY ] knob to select
“CANCLE” or “ARE U SURE”, and
press [ROTARY ] knob.
CANCEL: cancel resetting
ARE U SURE: “CLEARED” appears
in the display, and the memory will be
cleared.
CZ315E&CZ215E Owner's Guide A6 1112.indd 132015/01/09 9:25:38

Clarion CZ215E Specifications

General

Brand	Clarion
Model	CZ215E
Category	Car Receiver
Language	English