Clarion CZ301E User Manual

12
English
Radio Data System Operations
* This function can only be used when
“TP” appears in the display. When “TP”
appears, this means that the “Radio Data
System” broadcast station being received
has trafc announcement programmes.
Setting the TA standby mode
If you press the [TA] button, “TA” lights in
the display and the unit is set into the TA
standby mode until a trafc announcement
is broadcast. When a trafc announcement
broadcast starts, “TRAF INF” appears in the
display. If you press the [TA] button while
a trafc announcement broadcast is being
received, the trafc announcement broadcast
reception is cancelled and the unit goes into
the TA standby mode.
Cancelling the TA standby mode
As “TA” appears in the display, press the
[TA] button. The “TA” in the display goes off
and the TA standby mode is cancelled.
PTY (Programme Type)
This function enables you to listen to a
broadcast of the selected programme type
even if the unit is on a function mode other
than radio.
* Some countries do not yet have PTY
broadcast.
* In the TA standby mode, a TP station has
priority over a PTY broadcast station.
Selecting PTY
Press [MENU] button, then rotate the
[VOLUME] knob to select PTY type, press
the [VOLUME] knob, the unit begin
searching.
Downloaded from Caradio-Manual.com Manuals

Clarion CZ301E Specifications

General

Audio system	MOS-FET
MP3 playback	Yes
Audio formats supported	MP3, WMA
Supported radio bands	AM, FM
Product color	Black
Audio output channels	4.0 channels
Maximum power per channel	45 W
Illumination color	Blue
I/O ports	1x Aux 1x USB