Clarion CZ505

SiriusXM
Satellite
Radio Operations
3.
Press (
~
] or [
.,...
] to
select desired
channel within the selected Category. You
can see channel name, channel number,
artist,
title
or content by pressing
[DISP].
4.
Press
[VOLUME]
to
tune
to
selected
channel.
Note:
If
no operation is performed for
10
seconds,
the Category Browsing mode is canceled.
Preset scan
Preset
scan receives
the
channels
stored
in preset memory in order. This function is
useful
when searching for a desired channel
in
memory.
1.
Press
and
hold
the
( .....
] key
or
press
and
hold
the
[SCN/PS/AS]
button on the
remote
control.
2.
When a desired channel is tuned in, press
the
[SCNIPS/AS]
button again to continue
receiving that
channel.
Channel
scan (in current category)
Channel
scan
receives
the
channel
(in
current category) in order.
This
function is
useful
when searching
for a desired channel
in
current category.
1 .
Press
the [
..... ]
key
or press
the
[SCNIPSIAS]
button on the remote
control.
2.
When a desired
channel
is tuned in, press
the
[SCNIPS/AS] button again to continue
receiving that
channel.
Note:
•
Be careful not to press and
hold
the
[SCNI
PS/AS]
button
for
1
second
or
longer,
otherwise
the
preset
scan
function
will
begin and the unit starts scanning presets.
iTunese
song tagging
With iTunes song tagging, you can tag songs
you hear
while listening
to SiriusXM Satellite
Radio.
The
tagging information is saved in
your
radio
until
you
connect
your
iPod
or
iPhone and then the tagging information is
transferred to your iPod/iPhone. When your
iPod/iPhone
is
connected
to
iTunes,
you
will
then be able to preview and purchase the
song that you heard
while listening
to SiriusXM
Satellite
Radio.
Information
on using the iTunes song tagging
feature is described
below.
1.
A song may be tagged
while
listening to a
SiriusXM channel
if the
display shows the
"TAG"
icon.
2.
Press
and
hold
the
[VOLUME]
knob
while
the desired song is
playing.
3.
When
completed,
"STORED TAG
X
OF
64"
is displayed.
X means the number of tag stored.
Notes:
•
During tagging, the
iPod/iPhone
takes
priority
to
save
the
tag
information.lf
no
iPod/iPhone
is
connected,
the
tag
information is saved to this unit.
•
This unit can store up to
64
pieces of tag
information. When the memory of the unit is
full,
"MEMORY FULL"
may be
displayed.
•
When
an
iPod/iPhone
that
doesn't
support the tagging function is connected,
''TRANSFER
FAIL"
may be
displayed.
• If
there
is
stored
tag
information
on
the
unit, when an iPod/iPhone supporting the
tag function is connected,
the
stored tag
information will
be transferred to the iPod/
iPhone
automatically.
• If tag information
already
exists,
"ALREADY
TAGGED"
will
be
displayed when you try to
tag information again.
•
Tagging may be
canceled
by changing the
frequency or
channel.
• If
a song
is
tagged and the remaining storage
volume
of
the
connected
iPod/iPhone
is
sufficient to
hold
the song's tag information, it
will
be saved
on
the iPodliPhone.
Changing the
Display
Text information, such
as
the
channel name,
artist
name/feature,
song/program
title
and
content
is
available
with
each
SiriusXM
channel.
The
unit
can
display
this
text
information as
explained below.
1.
In
SiriusXM mode, press
[DISP] button.
Each
time
you
press
this
button,
the
display changes as shown below.
Band/Channel number/channel name =>
Artist Name =>
Song
Title=> Content
Info
=>
Category
Name
=>
Clock
=>
Band/
Channel
number/channel name
• If
there is no text information, nothing
will
be displayed.
Parental
Lock
I
Unlock
The SiriusXM Parental
Control
feature
allows
you to control access to channels that you
consider inappropriate for younger listeners.
When enabled, the Parental
Control feature
requires you to enter a password to tune into
the
locked channels. Information on setting
up
the
password,
setting
up the
channels
to be locked, and the method to access the
locked
channels is described
below.
1.
To
set up the password, press and
hold
[DISP]
then release
[DISP]
and press
[..,...]
to
scroll to
"PARENTAL PASSWORD".
Press
[VOLUME]
knob
to
change
password. Enter
old
password, then enter
new password. To enter password, rotate
[VOLUME]
knob to choose the numbers
(0-9)
and press
[....-]or
[..,...]to
enter
the next number in the password.
Once
all
4 numbers are entered, press and
hold
[VOLUME]
knob
to
confirm
password.
(Original
password is
"0000")
2.
To set up the
channels
to be locked, tune
to
the
channel
you
wish
to
lock.
Press
and
hold
[DISP]
then
release
[DISP]
and press
[..,...]to
scroll
to
"LOCK
CH",
press
[VOLUME]
knob to confirm.
Input
password as
explained
in step 1 and then
press and hold
[VOLUME]
knob to set the
locked channel. You
will
be asked to input
password. Enter
password
and
"LOCK"
will
be
displayed
if
it is
successful.
3.
For
unlocking the
locked
channel, press
and
hold
[DISP],
and
press
[
..,...
]
to
select
"UNLOCKCH".
Enter the password
and you can
unlock
the channel.
4.
To
access
the locked
channels,
select
a
channel
by
"DIRECT
SELECT'.
Press
and
hold
[MENU/-::::.1]
and
select
"DIRECT
SELECT"
by
pressing
the
[VOLUME]
knob.
Input
the desired
locked
channel
(you need to input 3 digits) and
input the password, then you can tune into
that
locked
channel.
CZ505
11